3′-6″ x 6′-8″ Man Door
$905.52
Weld-N-Go™ Man Door | Pre-Fabricated Container Door
Fast Installation. Easy Entry. Professional Finish.
The Weld-N-Go™ Man Door is a pre-fabricated steel man door and frame system designed to provide a large, unobstructed opening for shipping containers while dramatically reducing installation time. Built into a heavy-duty rectangular steel tube frame, this door welds directly into your container—no custom fabrication required.
What typically takes 4+ hours to build from scratch can be installed in as little as 45 minutes with Weld-N-Go™.
Key Benefits
- Pre-fabricated steel door and frame saves hours of labor
- Wide opening for equipment, pallets, and large items
- Installs in approximately 45 minutes
- Weld-on design for a permanent, secure installation
- Non-handed, reversible configuration for flexible installs
- Made and assembled in the USA
Included Hardware & Accessories
Each Wide Weld-N-Go™ Man Door comes complete with:
- Threshold plate
- Door shoe
- Gasket
- Raindrip
- Door lever
- Deadbolt (not included when panic hardware is selected)
Please let us know if any accessories are not needed when ordering or if you would like additional options such as panic hardware, keypad locks, or door closers.
Product Specifications
- Door Gauge: 18 gauge
- Edges: Seamless filled edges
- Core: Full body polystyrene
- Design: Non-handed
- Closer Reinforcement: 12 gauge
- Hinge Reinforcement: 7 gauge, reversible
- Top Cap: 16-gauge flush, galvanized
- Bottom Cap: 16-gauge inverted, galvanized
- Finish: Prime painted grey, two-part epoxy, factory applied & baked on
- Lock Prep: 161, Fed 86 edge, panic bar reinforced
- Fire Rating: WHI / ITS up to 3-hour, positive pressure & “S” smoke
- Standards: Meets or exceeds ANSI 250.4 and ANSI 250.8
- Hurricane Rated: Florida Approved FL-13624
- 18 Gauge
- Seamless Filled Edges
- Full Body Polystyrene Core
- Non-Handed Design
- 12-Gauge Closer Reinforcement
- 7-Gauge Hinge Reinforcement – Reversible
- 16-Gauge Flush Top Cap – Galvanized
- 16-Gauge Inverted Bottom Cap – Galvanized
- Prime Painted Grey Two Part Epoxy Factory Applied, Baked On
- Standard Lock Preparations Include 161, Fed 86 Edge, Panic Bar Reinforced
- WHI / ITS up to 3 hour, Positive Pressure and “S” Smoke included
- Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8
- Hurricane Tested Florida Approved FL-13624
- Prepared for Continuous Hinge Application
This product has not been reviewed yet!
View other reviews on our site:
"I was impressed with the ease of delivery and setup of my shipping container. It arrived in great condition and was ready to use right away."
"Amazing customer service, Ms. Kareen and Ms. Desiree made this purchase so easy and kept me and my team in the loop on every aspect from purchase to delivery. Driver was also punctual and so friendly."
"Super helpful and patient with questions, by far the best container company I have dealt with and the transport company were exceptional as well."
"I really like it when the team always kept me updated from quotation to delivery"